Delta places huge order for sustainable aviation fuel made with 839MW of green hydrogen
The SAF will be made by combining cellulosic biomass and renewable H2 using Fischer-Tropsch method
Fuel for the deal will be made using a version of the Fischer-Tropsch (FT) process, which chemically pairs carbon monoxide and hydrogen to produce synthetic hydrocarbons.
Hydrogen: hype, hope and the hard truths around its role in the energy transition
Supply will come from a new FT plant planned by US producer DG Fuels in Louisiana, furnished with an 839MW electrolyser to supply the hydrogen. Construction on the plant is due to begin in 2023, with first SAF production in the second half of 2026.
Delta will buy 55 million gallons of the fuel per year for seven years from 2027, pushing the company further towards its goal of procuring more than 400 million gallons of SAF annually by 2030 — the equivalent of 10% of its yearly fuel consumption.
As of 2021, Delta had secured more than 40% of that goal through offtake agreements. The DG Fuels deal — assuming it has not already been counted — would take that to around 54%.
Fischer-Tropsch
DG Fuels’ FT process utilises a carbon monoxide-heavy syngas made by processing cellulosic biomass —organic material such as plant or tree waste — at high temperatures and without oxygen to produce carbon monoxide and other gases, water and tar, and a small amount of hydrogen.
This syngas is then mixed with renewable hydrogen produced from the 839MW electrolyser and passed through a metal catalyst causing “polymerisation”, where the carbon monoxide and hydrogen molecules join together to form synthetic hydrocarbons. Further refinements then burnish them into SAFs.
According to Darcy, the process represents a departure from other FT processes for SAF, which typically source all the hydrogen from the organic material used to make the syngas, which would usually be a balance of carbon monoxide and hydrogen at a ratio of roughly 2:1.
By tweaking gasification so the syngas is richer in carbon monoxide and then adding hydrogen from an electrolyser, DG Fuels can optimise its SAF output by a factor of almost four, with 97% of the carbon from the biomass ending up in the fuel, the company claims.
Waste water from the FT process is then used in the electrolyser, which will be supplied by Norway’s HydrogenPro.
Currently the aviation biofuel market is dominated by waste-oil-derived biofuels such as HEFA-SPK (hydroprocessed esters and fatty acids synthetic paraffinic kerosene) — in fact, more than 95% of biofuel flights to date have used HEFA-SPK fuel.
But FT technologies are catching up. In May this year, Fulcrum Bioenergy began operations at its FT-based transport fuel plant in Nevada, which uses municipal waste as a feedstock.
So far, the largest SAF commitment from an airline was made by United Airlines last year when it agreed to buy 1.5 billion gallons over 20 years from Alder Fuels, which is developing technology with US manufacturer Honeywell to make SAFs from waste forestry products via pyrolysis.
(Copyright)